|
|
|
IR Kit
Many of the devices controlled by an ECU use infrared components to operate source equipment. An IR Kit provides a window from your ECU to your source equipment that may be out of the line-of-sight, whether located in the back of the room or enclosed in cabinetry. It receives signals from the Table Top IR Receivers and channels them to your source components and other equipment. The IR Kit supports up to six components using
single IR emitters or up to 12 components using dual IR emitters.
Includes:
- Connecting Block
- Table Top IR Receiver
- 4 Single IR Emitters
- Power Cord
- Instructions
Price $138.00
|
|
|
|
Plasma Friendly IR Kit
The Plasma Friendly IR Kit offers all the benefits of the original IR Kit plus plasma-friendly operation.
This receiver is designed with optical filtering to reject interference from plasma TVs. Additionally, it is immune from most sources of IR interference such as compact fluorescent lighting.
Includes:
- Connecting Block
- Plasma Friendly Receiver
- 4 Single IR Emitters
- Power Cord
- Instructions
Price $237.00
|
|
|
|
Single IR Emitter
A Single IR Emitter transfers infrared commands to a single device. Its head attaches to the component's IR sensor with an adhesive pad. The emitter's cable plugs into an emitter jack on an IR connecting block.
Price $20.00
|
|
|
|
Dual IR Emitter
A Dual IR Emitter transfers infrared commands to two devices. Its heads attach to the component's IR sensor with adhesive pads. The emitter's cable plugs into an emitter jack on an IR connecting block.
Price $25.00
|
|
|
|
50 Foot Extension Cable
The Extension Cable will add 50 additional feet to the length of an IR Emitter.
Price $30.00
|
|
|
|
In-Wall Receiver
The In-Wall IR Receiver can replace the Table Top IR Receiver and be mounted up high in a wall or in the ceiling. Positioned in the center of the ceiling, the In-Wall Receiver can greatly improve signal from the ECU. Installs in a standard single-gang wall box and fits a Decora®-style wall plate.
Price $98.00
|
|
|
|
Plasma Friendly In-Wall Receiver
The plasma-friendly version of the In-Wall IR Receiver employs additional optical filtering to reject noise from plasma displays. Installs in a standard single-gang wall box and fits a Decora®-style wall plate.
Price $213.00
|
